top of page
Paper-Hanger-Series-210-wide-attached-to-A4-Whiteboard-Series-02 V2 .jpg

Paper Hanger Signage Series

Paper Hanger Signage Australia

Based on the ‘gravity principle’ the Paper Hanger Series utilises an aluminium signage extrusion that encases internal aluminium rods designed to grip and hang paper for display purposes.

The Paper Hanger Series is ideal for office signage, notes, messages, architectural plans, displays, posters or boardroom presentations. It can be attached using double-sided foam tape directly to a wall or any other flat surface.

The Paper Hanger Series is available in lengths up to 1900mm and can be cut to your required size.

How it works

Paper Hanger - How it Works

To operate, insert the paper in behind the Paper Hanger’s aluminium rods. The paper is gripped in place through gravity, the rods and the grooved surface within the extrusion.

The Paper Hanger can be used as a stand alone product. Simply mount it to a flat surface with double sided tape.

Use it with the Architectural Modular Series

The Paper Hanger can also be used with the Architectural Modular Series. The Paper Hanger’s 21mm high extrusion allows for it to be simply attached to the Architectural Modular Series’ 21mm-high Insert with the use of double-sided tape.


The Paper Hanger Series longest length available is 1900mm.

Longer lengths can be achieved by butt-joining multiple units which will only require end-caps on the outer ends to secure the rods.

End Caps must be used on outer ends of the Paper Hanger for the system to function.

S2K can cut the Paper Hanger Series to your required length.


External Frame - The Paper Hanger Series’ external aluminium extrusion is Satin Natural Anodised Finish.

The Rods - The internal aluminium rods are Satin Natural Anodised Finish.

End Caps - The End Caps that are attached to either end of the Paper Hanger Frame are black plastic. These are only available in black.

Painting - The External Frame can be painted to your desired colour. It is not possible to paint any of the following parts: inside the frame, the rods, end End Caps.

Installation & Mounting

A Paper Hanger can be mounted directly to a wall or any flat surface with the use of double sided foam tape.

If incorporation onto an AM Series sign is required the Paper Hanger is designed to be attached directly to a 21mm high Insert with double sided tape. The Paper Hanger can only be added to the bottom insert on a sign.

The symbols above indicate the mounting options available to the Paper Hanger Series. Contact S2K Identity Systems for more detailed information.

Suitable Uses

The Paper Hanger Series is suited to a wide range of different applications.

Suitable for interior use only, the application options include: 

  • Displaying posters,

  • Notes,

  • Architectural drawings,

  • Messages,

  • Reports,

  • Schedules

  • Boardroom presentations.

bottom of page