Introduction
Based on the ‘gravity principle, the Paper Hanger Series utilises an aluminium extrusion with internal rods to grip and hang paper for display purposes.
The Paper Hanger Series is ideal for notes, messages, architectural plans, displays, posters or boardroom presentations. It can be attached using double-sided foam tape directly to a wall or any other flat surface.
The Paper Hanger Series is available in lengths up to 1900mm and can be cut to any size.
Rdg. Design No: 131912(1221/97)
How it works
Paper is easily inserted behind the Paper Hanger’s aluminium rods and is gripped in place through gravity and the grooved surface within the extrusion.
The Paper Hanger can also be used with the Architectural Modular Series. The Paper Hanger’s 21mm high extrusion allows for it to be simply attached to the Architectural Modular Series’ 21mm-high Insert with the use of double-sided tape.
Rdg. Design No: 131912(1221/97)
- How it Works PDF document, 63.23KB
Sizes
The Paper Hanger Series’ longest available size is 1900mm, although longer lengths can be achieved by butt joining multiple units which will only require End Caps on the outer ends to secure the rods. End caps must be used on outer ends of the Paper Hanger for the system to function.
Rdg. Design No: 131912(1221/97)
- Size chart PDF document, 58KB
Finishes
The Paper Hanger Series’ aluminium extrusion and rods come in satin natural anodised finish and the End Caps are black plastic.
Mounting options
A Paper Hanger can be mounted directly to a wall, a flat surface or a workstation via the use of double sided tape.
It can also be mounted directly to an AM Series Sign. As seen above. The Paper Hanger is 21mm high and sits directly over a 21mm AM Series Insert if incorporation into an AM Series sign is required. It is fixed with double sided tape.
Rdg. Design No: 131912(1221/97)
