Introduction
Designed for the blind and visually impaired, S2K’s Braille and Tactile Signage range complies with the Australian Building Code (section D3.6). The signs incorporate Grade 1 Braille as well as raised letters and symbols.
S2K’s Braille3D product incorporates raised text and symbols for people with a visual impairment and who are unable to read Braille.
The Architectural Modular Series is compatible with Braille3D, Braille and Tactile membranes. Braille3D is suitable for use on any of the Inserts in the Architectural Modular Series range, This system allows the Braille and Tactile insert to be interchangeable if required.
For more information about Braille and Tactile Signs, please email braille@s2k.com.au.
Standard sign options
If the sign type you require is not shown above, please specify your requirements. Alternative layouts can be designed.
All Braille3D signs are made from plastic materials and laminated to aluminium plates for mounting to substrate. Metal faces on these signs are not available.3M colours are a close representation. Other colours are available; for custom signs, please specify a 3M vinyl colour.
- Suggested layout information PDF document, 30.29KB
Mounting options
Signs must be placed at a maximum top height of 1600mm and a minimum bottom height of 1200mm. The signs must be mounted to the wall on the latch side of the door no closer than 50mm from the frame.
In the event that there is insufficient room on the latch side of the door, the sign may be placed on the non latch side of the door. If the above 2 options are not possible, the sign may be placed on the door itself.
Downloads
- Suggested layout information PDF document, 30.29KB
